Custom Paper Cups · Wholesale
Custom 22 oz Paper Cups
Plan a branded 22 oz hot-cup order on the listed model: 90 mm rim, 60 mm base and 170 mm height. Compare single wall and double wall, then sample-fit a Φ90 mm lid candidate before a printed run. Ripple wall is not listed at this size.
- Rim
- Φ90mm
- Base
- Φ60mm
- Height
- 170mm
- Lid candidate
- Φ90mm
Standard cup MOQ: 20,000 per size. Aqueous-coated cup MOQ: 50,000 per size.
01 · The spec that decides your order
Which lid fits a 22 oz cup
The listed 22 oz model uses a Φ90mm rim, in the same lid family as the 12, 16 and 20 oz hot cups. Use that measurement to shortlist lid candidates, then try the selected lid with the cup by sample to confirm seating and takeaway handling. Cups and lids are quoted as separate items.
| Lid material | Styles | Serving use | What it is good for |
|---|---|---|---|
| PP | Flat sip-through, dome sipper | Selected hot-drink lids | Compare the offered lid specification, fit and handling for your takeaway drink. |
| PS | Flat sip-through | Selected hot-drink lids | A rigid lid option; sample the selected cup and lid together. |
| rPET | Flat, dome | Selected cold-drink lids | Confirm the intended beverage and the offered lid specification. |
| CPLA | Flat sip-through | Selected hot-drink lids | Crystallized PLA. If compostability is required, include the applicable standard in your inquiry. |
| Paper | Flat | Selected beverage lids | Compare the paper and barrier specification for your intended drink. |
Lids are quoted separately from 10,000 pieces per size. Full range on the cup lids page.
02 · Pick the wall
22 oz cup dimensions across two builds
The listed model uses a Φ90mm rim, a 60mm base and a 170mm height on single wall and double wall. Ripple wall is not listed at 22 oz. Compare the wall, then sample-fit a Φ90mm lid. Brim capacity is confirmed with the quotation. Single wall ships 1,000 cups per box. Double wall cups per box are confirmed with the quotation.
Single wall
- Rim
- Φ90mm (3.54")
- Height
- 170mm (6.69")
- Pcs / box
- 1,000
A single paper wall. This card lists the confirmed 22 oz model: Φ90mm rim, 60mm base, 170mm height. Brim capacity for this single wall model is confirmed with the quotation.
Double wall
- Rim
- Φ90mm (3.54")
- Height
- 170mm (6.69")
An outer paper layer for handling comfort. This card lists the confirmed 22 oz model: Φ90mm rim, 60mm base, 170mm height. Brim capacity and cups per box for this double wall model are confirmed with the quotation. Sample it with a Φ90mm lid candidate.
Paperboard weight for this 22 oz model is confirmed with the quotation. Include the wall, coating and print specification so the quoted cup matches the model on this page.
Paper cup quotes depend on the paperboard brand and grade, GSM, thickness, coating and print specification. Compare the same capacity, quantity and delivery terms, including any sleeve used in your serving setup.
The listed 22 oz model measures Φ90mm (3.54") at the rim, 60mm (2.36") at the base and 170mm (6.69") tall. Ripple wall is not listed at 22 oz. Single wall ships 1,000 per box in a 455×365×620mm case. Double wall cups per box are confirmed with the quotation. Dimensions are nominal and can vary by about 2mm.
03 · Pick the coating
Coating options for your 22 oz cup order
Share the beverage, serving conditions and any material requirement. We confirm the offered coating and cup construction together during quotation.
PE
PE-lined cup options
A polyethylene barrier on paperboard. Match the selected cup to your drink and serving conditions; price depends on the complete specification.
PLA
PLA-lined cup options
A PLA barrier on paperboard. For a composting requirement, we confirm the selected product and supporting information during quotation.
Aqueous
Water-based barrier options
A water-based dispersion coating that forms a barrier as it dries. Tell us your drink, contact time and market requirements so we can confirm suitable cup options.
Have a specific standard to meet? Include it in your inquiry so we can confirm the selected product and relevant documentation. Coating names alone do not establish microwave suitability or recycling and composting acceptance.
Custom printing for 22 oz wholesale paper cups
Customize your logo and artwork on an existing cup specification. Choose the wall and rim profile first, then review the printable layout for that build. A special shape or size may require tooling and a higher setup cost.
1. Select the cup
Match the serving volume, wall and coating to your menu. Include a candidate lid if the drink is served for takeaway.
2. Prepare your artwork
Flexographic printing supports up to 7 colors. Send AI, PDF or EPS files with outlined fonts, or a high-resolution PNG at 300 DPI, for review against the selected cup layout.
3. Review before the bulk run
A digital proof confirms the design. Stock samples help assess the cup and lid, while a pre-production sample can be discussed for the printed specification.
Discuss your 22 oz printed cup order with the cup specification, artwork and quantity per size.
04 · Typical use
Where 22 oz custom cups fit
Extra-large hot drinks
Use the listed 90 mm rim, 60 mm base and 170 mm height when you compare this cup with the drink you serve. Brim capacity depends on the wall you order, so confirm that figure with the quotation.
Programs on one Φ90 mm lid
Shortlist the same lid family used with 12, 16 and 20 oz hot cups, then sample-fit the lid on this cup. Cups and lids are quoted separately.
Catering and institutional service
Plan this size as its own specification and its own quantity. Ripple wall is not part of the 22 oz list. Timing is confirmed with the quotation.
05 · Ordering
Plan your wholesale 22 oz order
- Standard cup MOQ
- 20,000 pcs per size
- Aqueous cup MOQ
- 50,000 pcs per size
- Lid MOQ
- 10,000 pcs per size
- Printing
- Flexo, up to 7 colors
- Samples
- Stock samples; shipping applies
- Timing
- Confirmed with your quotation
For 22 oz, name single wall or double wall and the 90 mm rim, 60 mm base, 170 mm height model. Sample fitting confirms the selected Φ90 mm lid. Cups and lids are quoted separately. Ask for brim capacity for the wall you are ordering. Single wall ships 1,000 per box; double wall cups per carton are confirmed with the quotation.
Send the selected wall and coating, artwork, cup quantity per size, lid requirements and delivery destination. We confirm available options, pricing and timing with your quotation.
Each size meets its own MOQ. Different sizes cannot be combined to reach the minimum. Cup and lid quantities are quoted separately.
06 · Questions
Frequently asked
Do you supply custom 22 oz paper cups wholesale? +
Yes. Custom printing on existing 22 oz specifications starts at 20,000 cups per size for standard options. Aqueous-coated cups start at 50,000 per size. Each ordered size meets its own minimum; sizes are not combined to reach it.
Do you supply 22 oz paper cups with lids? +
Yes. Cups and lids are quoted separately. The listed cup builds use a Φ90mm rim. We match the proposed lid to the selected cup and confirm seating by sample. Lids have a minimum of 10,000 pieces per size.
What are the dimensions of a 22 oz paper cup? +
The listed 22 oz model measures Φ90mm (3.54") at the rim, 60mm (2.36") at the base and 170mm (6.69") tall on single wall and double wall. Ripple wall is not listed at 22 oz. Dimensions are nominal and can vary by about 2mm. Brim capacity for this height is confirmed with the quotation.
What is the 22 oz cup size in ml and mm? +
The listed 22 oz model is Φ90mm at the rim, 60mm (2.36") at the base and 170mm (6.69") tall. Ripple wall is not listed at 22 oz. Brim capacity for this height is confirmed with the quotation. Single wall ships 1,000 per box in a 455×365×620mm case. Double wall cups per box are confirmed with the quotation. The ounce name identifies the product size.
Can I get 22 oz cups printed with my logo? +
Yes. Flexographic printing supports up to 7 colors on the selected cup design. Send your logo or artwork as AI, PDF or EPS with fonts outlined, or a high-resolution PNG at 300 DPI. We prepare a digital proof before production; a physical sample helps review the cup, print and lid together.
Can I order a different shape or size? +
Printing is normally customized on existing cup specifications. A different shape or size may require tooling and higher setup costs. We review feasibility, quantity and timing separately before order confirmation.
Can you provide certification or test information for 22 oz cups? +
Tell us the product, intended use and standard your project requires. We will confirm suitable specifications and the relevant documentation with your quotation. Certified materials or additional testing may affect price and timing, which we discuss before order confirmation.
Test the 22 oz before you commit volume
Try the selected cup with your drink and proposed lid, then review the artwork and wholesale order. Standard cups start at 20,000 per size; aqueous-coated cups at 50,000 per size.
Free stock samples are subject to availability. Shipping is paid by the buyer.