Custom Paper Cups · Wholesale

Custom 10 oz Paper Cups

Plan a branded 10 oz hot-cup order on the listed model: 90 mm rim, 60 mm base and 94 mm height. Compare single, double and ripple wall, then sample-fit a Φ90 mm lid candidate before a printed run.

Rim
Φ90mm
Base
Φ60mm
Height
94mm
Lid candidate
Φ90mm

Standard cup MOQ: 20,000 per size. Aqueous-coated cup MOQ: 50,000 per size.

White 10 oz single wall paper coffee cup with a rolled rim on a cafe counter, shown for CupsPak custom cup selection
10 oz single wall cup shown in a cafe setting. Printed designs and lid options are selected with your quotation.

01 · The spec that decides your order

Which lid fits a 10 oz cup

The listed 10 oz model uses a Φ90mm rim, in the same lid family as the 12, 16, 20 and 22 oz hot cups. Use that measurement to shortlist lid candidates, then try the selected lid with the cup by sample to confirm seating and takeaway handling. Cups and lids are quoted as separate items.

Lid material Styles Serving use What it is good for
PP Flat sip-through, dome sipper Selected hot-drink lids Compare the offered lid specification, fit and handling for your takeaway drink.
PS Flat sip-through Selected hot-drink lids A rigid lid option; sample the selected cup and lid together.
rPET Flat, dome Selected cold-drink lids Confirm the intended beverage and the offered lid specification.
CPLA Flat sip-through Selected hot-drink lids Crystallized PLA. If compostability is required, include the applicable standard in your inquiry.
Paper Flat Selected beverage lids Compare the paper and barrier specification for your intended drink.

Lids are quoted separately from 10,000 pieces per size. Full range on the cup lids page.

02 · Pick the wall

10 oz cup dimensions across three builds

The listed model uses a Φ90mm rim, a 60mm base and a 94mm height. Compare the wall, then sample-fit the lid. The double wall series publishes 300ml and 500 cups per box for its Φ90mm × 94mm 10 oz cup. Single wall ships 1,000 cups per box. Brim capacity for the single wall and ripple wall builds, and ripple wall cups per box, are confirmed with the quotation. Embossed 10 oz cups are a separate profile and are not the model listed here.

Not-to-scale 10 oz paper cup dimension diagram for single wall, double wall and ripple wall, each drawn with a 90 mm rim, 60 mm base and 94 mm height
Not to scale. The three outlines show the listed 10 oz model: 90 mm rim, 60 mm base, 94 mm height. This diagram does not assign one brim capacity to every wall. View full-size diagram

Paperboard weight for this 10 oz model is confirmed with the quotation. Include the wall, coating and print specification so the quoted cup matches the model on this page.

Paper cup quotes depend on the paperboard brand and grade, GSM, thickness, coating and print specification. Compare the same capacity, quantity and delivery terms, including any sleeve used in your serving setup.

The listed 10 oz model measures Φ90mm (3.54") at the rim, 60mm (2.36") at the base and 94mm (3.70") tall. The double wall series lists 500 cups per box for its Φ90mm × 94mm 10 oz cup. Single wall ships 1,000 per box in a 455×365×455mm case. Ripple wall cups per box for this model are confirmed with the quotation. Dimensions are nominal and can vary by about 2mm.

03 · Pick the coating

Coating options for your 10 oz cup order

Share the beverage, serving conditions and any material requirement. We confirm the offered coating and cup construction together during quotation.

PE

PE-lined cup options

A polyethylene barrier on paperboard. Match the selected cup to your drink and serving conditions; price depends on the complete specification.

PLA

PLA-lined cup options

A PLA barrier on paperboard. For a composting requirement, we confirm the selected product and supporting information during quotation.

Aqueous

Water-based barrier options

A water-based dispersion coating that forms a barrier as it dries. Tell us your drink, contact time and market requirements so we can confirm suitable cup options.

Have a specific standard to meet? Include it in your inquiry so we can confirm the selected product and relevant documentation. Coating names alone do not establish microwave suitability or recycling and composting acceptance.

Custom printing for 10 oz wholesale paper cups

Customize your logo and artwork on an existing cup specification. Choose the wall and rim profile first, then review the printable layout for that build. A special shape or size may require tooling and a higher setup cost.

  1. 1. Select the cup

    Match the serving volume, wall and coating to your menu. Include a candidate lid if the drink is served for takeaway.

  2. 2. Prepare your artwork

    Flexographic printing supports up to 7 colors. Send AI, PDF or EPS files with outlined fonts, or a high-resolution PNG at 300 DPI, for review against the selected cup layout.

  3. 3. Review before the bulk run

    A digital proof confirms the design. Stock samples help assess the cup and lid, while a pre-production sample can be discussed for the printed specification.

Discuss your 10 oz printed cup order with the cup specification, artwork and quantity per size.

04 · Typical use

Where 10 oz custom cups fit

  • Regular coffee service

    Use the listed 90 mm rim, 60 mm base and 94 mm height when you compare this cup with the drink you serve. Brim capacity depends on the wall you order, so confirm that figure with the quotation.

  • Menus that share a Φ90 mm rim

    Shortlist the same lid family used with 12, 16, 20 and 22 oz hot cups, then sample-fit the lid on this cup. A shared rim measurement does not replace that check.

  • Branded cafe and office runs

    Keep the approved artwork on this size as its own order. Quantity is planned per size, and a different wall is a separate specification.

05 · Ordering

Plan your wholesale 10 oz order

Standard cup MOQ
20,000 pcs per size
Aqueous cup MOQ
50,000 pcs per size
Lid MOQ
10,000 pcs per size
Printing
Flexo, up to 7 colors
Samples
Stock samples; shipping applies
Timing
Confirmed with your quotation

For 10 oz, name the wall and the 90 mm rim, 60 mm base, 94 mm height model. Sample fitting confirms the selected Φ90 mm lid. Ask for brim capacity for the wall you are ordering. Single wall ships 1,000 per box; double wall and ripple wall cups per carton are confirmed with the quotation.

Send the selected wall and coating, artwork, cup quantity per size, lid requirements and delivery destination. We confirm available options, pricing and timing with your quotation.

Each size meets its own MOQ. Different sizes cannot be combined to reach the minimum. Cup and lid quantities are quoted separately.

06 · Questions

Frequently asked

Do you supply custom 10 oz paper cups wholesale? +

Yes. Custom printing on existing 10 oz specifications starts at 20,000 cups per size for standard options. Aqueous-coated cups start at 50,000 per size. Each ordered size meets its own minimum; sizes are not combined to reach it.

Do you supply 10 oz paper cups with lids? +

Yes. Cups and lids are quoted separately. The listed cup builds use a Φ90mm rim. We match the proposed lid to the selected cup and confirm seating by sample. Lids have a minimum of 10,000 pieces per size.

What are the dimensions of a 10 oz paper cup? +

The listed 10 oz model measures Φ90mm (3.54") at the rim, 60mm (2.36") at the base and 94mm (3.70") tall on the single wall, double wall and ripple wall cards. Dimensions are nominal and can vary by about 2mm. The double wall series publishes 300ml for its Φ90mm × 94mm 10 oz cup. This page does not give one brim capacity for every wall.

What is the 10 oz cup size in ml and mm? +

The listed 10 oz model is Φ90mm at the rim, 60mm (2.36") at the base and 94mm (3.70") tall. The double wall series publishes 300ml for its Φ90mm × 94mm 10 oz cup. Ask for brim capacity on the wall you are ordering. The ounce name identifies the product size.

Can I get 10 oz cups printed with my logo? +

Yes. Flexographic printing supports up to 7 colors on the selected cup design. Send your logo or artwork as AI, PDF or EPS with fonts outlined, or a high-resolution PNG at 300 DPI. We prepare a digital proof before production; a physical sample helps review the cup, print and lid together.

Can I order a different shape or size? +

Printing is normally customized on existing cup specifications. A different shape or size may require tooling and higher setup costs. We review feasibility, quantity and timing separately before order confirmation.

Can you provide certification or test information for 10 oz cups? +

Tell us the product, intended use and standard your project requires. We will confirm suitable specifications and the relevant documentation with your quotation. Certified materials or additional testing may affect price and timing, which we discuss before order confirmation.

Test the 10 oz before you commit volume

Try the selected cup with your drink and proposed lid, then review the artwork and wholesale order. Standard cups start at 20,000 per size; aqueous-coated cups at 50,000 per size.

Free stock samples are subject to availability. Shipping is paid by the buyer.

Get Free Quote